27th Aachen Colloquium 2018

Clean and Efficient: We Show How to Combine Lower Emissions with Reduced Fuel Consumption.

Long before EVs establish themselves as the dominant vehicle technology, electrification has the power to make a big contribution to clean urban mobility. At the 27th Aachen Colloquium (October 8-10), we will demonstrate to leading industry experts how 48V hybrid technology can be used to deliver reduced nitrogen oxide (NOx) emissions for both diesel and gasoline engines. Continental’s approach combines engine-integrated technology packages with electrically assisted exhaust aftertreatment functions. These new functions, powered by the additional electrical energy generated by a 48V hybrid vehicle, open the way for further advances in both emissions and fuel consumption.
“Using the Continental technology packages, it is possible to combine reduced emissions with even more frugal fuel consumption. Equipped with 48V hybridization, diesel engines are able to combine their fuel efficiency with NOx emissions so low they even comply with the NOx limits currently under discussion for the next, even tougher stage in EU emissions legislation. That means the fuel-efficient diesel engine will be able to continue making a contribution to reduced CO2 emissions,” says Wolfgang Breuer, head of the Engine Systems business unit at Continental.

Video: 48 Volt Eco Drive – explained in a simple way!


Clean Technology Resolves NOx Issues

“With its combination of technology packages and innovative control functions, the demonstrator vehicle achieves seamless compliance with the strict target we set ourselves across all operating conditions, from cold start to high engine load,” adds Giovanni Avolio, head of Diesel System Engineering at the Engine Systems business unit. With the hardware packages and new control functions, Continental has met a number of important development goals, allowing the performance of the electric motor to be optimized both in driving mode and recuperation mode, while the electrically heated catalyst EMICAT® enables the engine management to achieve consistently low-CO2 operation sooner. At the same time, the charge status of the 48V battery is managed so that the battery has as much charge in reserve at the end of the journey as when setting out.
Video: Super Clean Electrified Diesel

Electrification for the Gasoline Engine

One requirement shared by diesel and gasoline engines is that a sufficiently high exhaust system temperature must be maintained across all load conditions if the aftertreatment system is to deliver high conversion efficiency at all times. With this in mind Continental has now developed a catalytic converter for gasoline-powered vehicles featuring two integrated electrically heated discs. “Due to the positioning of these two heated discs (Dual Electrical Heatable Catalyst), it takes only a few seconds for the entire catalytic converter to reach an efficient conversion temperature,” says Thomas Knorr, Group Leader Technology & Innovation at the Powertrain division. The aim of this technology is to help ensure compliance with strict NOx emission standards for gasoline engines.
Another thing that direct-injection gasoline vehicles and diesels increasingly have in common is that more and more gasoline vehicles are now being equipped with a particulate filter (gasoline particulate filter, GPF). As soon as the particulate load in the GPF reaches a given level, the filter must be regenerated. Here too the new technology from Continental can help: “By appropriate control of the two heated discs in the catalytic converter, we can ensure that the second disc also generates the required temperature for regeneration of the downstream GPF by purely electric means,” says Knorr.

Video: Electrically Heated Catalytic Converter EMICAT® - Explained in a Simple Way!

Find some insights live from 27th Aachen Colloquium here.


Super Clean Electrified Diesel: Towards Real NOx Emissions below 35 mg/km

Optimization of the 48 V Hybrid Technology to Minimize Local Emissions in the RDE