Off-Highway

Controller for Electrically Heated Catalyst (EMICAT®)

Construction & Mining

Electrically Heated Catalysts & Components

Solutions for Off-Highway

Choose Vehicle Type

Construction & Mining

Exhaust Management & After-treatment

Electrically Heated Catalyst & Components

Controller for Electrically Heated Catalyst (EMICAT®)

Controller for Electrically Heated Catalyst (EMICAT®)

Overview
Specifications
Benefits

Contact Us

Controller for Electrically Heated Catalyst (EMICAT®)

This product is a power control for the Electrically Heated Catalyst EMICAT®, based on a 32 bit microcontroller unit.

Technical Specifications

Voltage: 12/24 Volt (48 Volt in development)
Electrical Power: 1.6 kW (12V), 2.5 kW (24V), 3.0 kW (48V)
Max. continuous current: 180 A (12V), 140 A (24V), 80 A (48V)
PWM output, 10 Hz base frequency
Molex MX 150 communication connector
LEAR MAK 12 high current connectors
Dimensions incl. flanges: 165 x 110 x 42 mm
IP6K9K protection class
Ambient temperatures: -40°C to +85°C

Features & Benefits

CAN interface for communication with ECU and SCR controller
Diagnostic and development tools via CAN
Electrically protected output (overcurrent, short circuit to ground and battery)
EMC compatible design
Redundancy switch